FIEDLER H1, Руководство пользователя

Страница: 75 / 82

Hydro Logger H1 User manual
FIEDLER
electronics for ecology
75
6.10. Parameters for sending data under TCP/IP protocol
The "GPRS" tab contains the parameters needed to set up periodic sending of
archived data via GSM/GPRS network to a server in the Internet.
Checking the "Periodic sending of archived data" option in the upper left corner
of the window enables setting of individual parameters of this service. Uncheck
this option to temporarily or permanently disable GPRS communication.
Entering the date and time is used to set up regular data sending. Setting the
date to a future day will enable sending from that day onwards. On the other
hand, the "old" date in the setting does not matter, the first sending will be done
at the nearest set hour and minute.
Under this option are the parameters for periodic
data sending.
If an alarm condition occurs on any measurement
channel (it does not matter whether it is a limit or a
bridge condition), the communicator can send data
to the server more frequently than in the normal "quiet" state. The value of the
alarm interval parameter should not be less than 30 minutes. A shorter interval
would unnecessarily burden both the communicator battery and the GSM/GPRS
network, as well as the server itself receiving data from multiple stations, and
would also negatively affect the cost of data services
The Internet access point must be selected from the offer presented, depending
on the type of SIM card used and the operator. The "optional" option also allows
you to specify special APNs of private corporate networks or foreign operators.
These parameters are set at the factory and do not need to be changed. If the
device will be operated in the customer's own system and the data will be trans-
ferred to the customer's own server, it is necessary to set the corresponding IP
address and the port used.
F i r s t t i m e s e n d
F u r t h e r
A l a r m i n t e r v a l
A P N ( A c c e s s
P o i n t N a m e )
S e r v e r I P a d d r e s s
a n d p o r t
Special command line for
modem settings
Enabling GPRS data trans-
fers A list of preset
APNs (Internet
access points)
for the selected
mobiles. opera-
tors
Setting the time for periodic
sending of data to the ser-
ver
Set the interval in days or
hours for periodic data uplo-
ads
Setting the interval in mi-
nutes for sending data for
the duration of an alarm
condition on a measure-
ment channel
Box for setting
your own APN for
operators not lis-
ted
Name and
password to ac-
cess the private
network.
Setting the ser-
ver address, port
and number of
retries in case of
failed data trans-
fer to the server.