FIEDLER H1 Скачать руководство пользователя | Manualshive

Страница: 29 / 82

background image

Hydro Logger H1

User manual

FIEDLER

electronics for ecology

29

4.4.2.

Power supply for connected sensors and transducers

In  addition  to  the  input  terminals  for  connecting  the  measured  signals,  the
Hydro Logger H1 also has 2 types of power terminals for powering the connec-
ted sensors and probes.
On the terminals Unap (terminals 3, 6, 10) the supply voltage is present
only during the measurement of signals from the connected sensors. The mea-
surement interval is an adjustable parameter ranging from 1 minute to 24 hours.
Another adjustable parameter of the unit allows to switch on this power supply
in advance of the actual measurement, so that the connected sensors have time
to start up and correctly adjust the size of the output signal in proportion to the
physical quantity being monitored.
The supply voltage at the Unap terminals is user adjustable from +6 V to +15 V.
The  choice  of  the  supply  voltage  magnitude  is  determined  by  the  user  when
parameterizing the instrument and depends on the type of sensors and measu-
ring probes connected. For sensors and probes connected via RS-485, the lower
voltage value is usually set near +6 V and for pressure or level sensors with a 4-
20 mA output signal, the higher voltage value is u15 V.
The required supply voltage is generated by the integrated DC/DC converter in
the instrument from the battery voltage. A lower supply voltage value extends
the life of the power battery.
Some sensors require a continuous uninterrupted power supply. Examples inc-
lude  OPTO  sensors  used  for  pulse  sensing  from  propeller  water  meters.  The
Uopto  terminals  (terminals  15  and  18)  are  designed  to  supply power  to such
sensors, and a 3.6V battery voltage can be permanently present. This voltage
must be permanently switched on when parameterizing the instrument.
Permanently powered sensors must not overload the battery in the station and
therefore their current consumption should not exceed 200

µA

. For example,

OPTO sensors type VLP-8 to VLP-11 are suitable, which draw 80

µA

from the

+Uopto terminal.

P o w e r t e r m i n a l

+ U n a p

P o w e r c l a m p

+ U o p t o

«
...
27
28
29
30
31
...
»

Содержание H1



















































































Отзывы:

Нет отзывов

Похожие инструкции для H1

SePem 01 Master

Бренд: sewerin Страницы: 78

Бренд: VOLTCRAFT Страницы: 8

Бренд: Microedge Instruments Страницы: 64

Fridge-tag Ultra Low

Бренд: berlinger Страницы: 60

Бренд: T&D Страницы: 22

EASYSENSE V-Hub

Бренд: Data Harvest Страницы: 15

EASYSENSE V-Log

Бренд: Data Harvest Страницы: 31

Бренд: T&D Страницы: 2

Бренд: EasyLog Страницы: 11

Бренд: Keithley Страницы: 478

Бренд: RBR Страницы: 48

Бренд: Acksen Страницы: 2

Бренд: SWR SCIENCE Страницы: 123

Бренд: Dickson Страницы: 2

Бренд: Triton Electronics Страницы: 52

Бренд: Sensitech Страницы: 2

Бренд: SoundEar Страницы: 16

Бренд: NexSens Technology Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды