FIEDLER H1 страница 18 Скачать руководство пользователя | Manualshive

Страница: 18 / 82

background image

Hydro Logger H1

User manual

18

electronics for ecology

FIEDLER

4.1.1.

Mounting bracket DH1

The  Hydro  Logger  H1's  simple  stainless
steel bracket has two mounting holes for
quick  attachment  to  the  support
structure. The bracket also includes a set
of mounting screws and dowels.
The  DH1  bracket  is  simply  attached  to
the  wall  using  two  dowels  and  the
supplied  screws  and  then  the  bottom
part of the Hydro Logger H1 is screwed to
it  using  the  4  supplied  M5x40  screws.
Once the GSM antenna is connected, the mechanical installation is complete.

4.1.2.

Protective enclosures for H1

The Hydro Logger H1 is supplied either separately with a simple DH1 stainless
steel bracket for placing the device directly on a wall or other vertical structure,
or it can be supplied built into one of the IP66-rated protective enclosures.
These enclosures not only serve to protect the instrument in aggressive wet en-
vironments, but can also be used as a housing for an external 12V/9Ah power
supply battery or as lockable protection for the instrument against mechanical
damage and vandalism.

CABINET THALASSA-H1

The smallest and most affordable type of cabinet for housing the Hydro Logger
H1. The cabinet is supplied with mounted stainless steel brackets with holes for
clamps, with which it can be easily attached to a mast, rainfall gauge stand, etc.
When ordering, please specify the required size of the stainless steel shackles
supplied (1 1/4", 1 1/2", 2").

Thalassa-H1 cabinet with H1 unit installed

There is no space for inserting a 12V/9Ah backup battery in this type of pro-
tective enclosure.
THALASSA-H1 cabinet dimensions (h x w x d): 241 x 194 x 87 mm

Thalassa-H1 cabi-

net installed on

SR03 rainfall

gauge stand

«
...
16
17
18
19
20
...
»

Содержание H1



















































































Отзывы:

Нет отзывов

Похожие инструкции для H1

Бренд: iGage Страницы: 16

Бренд: Fluke Страницы: 84

Бренд: Dwyer Instruments Страницы: 2

Бренд: vendon Страницы: 9

Бренд: Geonics Limited Страницы: 44

myDatalogNANO Ex

Бренд: Microtronics Страницы: 111

Бренд: Lumel Страницы: 2

Бренд: TFA Dostmann Страницы: 25

Бренд: Wohler Страницы: 28

Бренд: Wohler Страницы: 30

Бренд: Transcat Страницы: 8

Бренд: Mikster Страницы: 2

Бренд: ZLG Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды