FibroLAN Falcon Gen-3 M-Class, Руководство пользователя

Страница: 130 / 473

Falcon M-Class | User Guide
130
By clicking on “Marcello” user you get the following edit display which can be modified:
By clicking on “Add New User” on the previous User configuration display, you may add a new user
Refer to below display
Figure 4-71: Add/Edit User Configurations
Table 4-68: Add/Edit
User Configuration
Parameters
User Name A string identifying the user name that this entry should belong to. The
allowed string length is
1 to 31 . The valid user name allows letters,
numbers and underscores.
Password The password of the user. The allowed string length is 0 to 31 .
Any printable characters including Space is accepted
Privilege level The privilege level of the user. The allowed range is 1 to 15 . If the
privilege level value is 15, it can access all groups, i.e. that is granted the
fully control of the device. But others value need to refer to each group
privilege level. User's privilege should be same or greater than the group
privilege level to have the access of that group. By default setting, most
groups privilege level 5 has the read-only access and privilege level 10 has
the read-write access. And the system maintenance (software upload,
factory defaults and etc.) need user privilege level 15. Generally, the
privilege level 15 can be used for an administrator account, privilege level
10 for a standard user account and privilege level 5 for a guest account.
Marcello is a new added User with privilege level 10