FibroLAN Falcon Gen-3 M-Class, Руководство пользователя

Страница: 120 / 473

Falcon M-Class | User Guide
120
Table 4-62:
EVC Control List Configuration
Parameters
EVC ID The EVC ID identifies the EVC. The range is from 1 through 128 .
VID
The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or
S-custom tag depending on the NNI port VLAN configuration. The range
is from
1
through
4095
.
IVID
The Internal/classified VLAN ID in the PB network. The range is from 1
through 4095 .
Learning
The learning mode for the EVC controls whether source MAC addresses
are learned for frames matching the EVC. Learning may be disabled if
the EVC only includes two UNI/NNI ports. The possible values are:
Enabled : Learning is enabled (MAC addresses are learned).
Disabled : Learning is disabled (MAC addresses are not learned).
Inner Tag Type
The inner tag type is used to determine whether an inner tag is inserted
in frames forwarded to NNI ports. The possible values are:
None : An inner tag is not inserted.
C-tag : An inner C-tag is inserted.
S-tag : An inner S-tag is inserted.
S-custom-tag : An inner tag is inserted and the tag type is determined
by the VLAN port configuration of the NNI
Inner VID Mode
The inner VID Mode affects the VID in the inner and outer tag. The
possible values are:
Normal : The VID of the two outer tags aren't swapped.
Tunnel : The VID of the two outer tags are swapped, so that the VID of
the outer tag is taken from the Inner Tag configuration and the VID of
the inner tag is the EVC VID. In this mode, the NNI ports are normally
configured to do EVC classification based on the inner tag.
Inner Tag VID The Inner tag VLAN ID. The allowed range is from 0 through 4095 .
Inner Tag
PCP/DEI
Preservation
The inner tag PCP and DEI preservation. The possible values are:
Preserved : The inner tag PCP and DEI is preserved.
Fixed : The inner tag PCP and DEI is fixed.
Inner Tag PCP The inner tag PCP value. The allowed range is from 0 through 7 .
Inner Tag DEI The inner tag DEI value. The allowed value is 0 or 1
Outer Tag VID
The EVC outer tag VID for UNI ports. The allowed range is from 0
through 4095
NNI Ports
The list of Network to Network Interfaces for the EVC.
Modification
Button
You can modify each EVC in the table using the following button
: Adds new EVC.
Buttons
Refresh:
Click to refresh the displayed table starting from the “Start from the MAC
address” and “VLAN” input fields.
Auto-refresh : Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
Remove All : Click to remove all ECEs.
By clicking on the right lowest plus sign on the previous display
EVC Control List
Configuration,
you get the EVC Configuration displays. Refer to the next section