FibroLAN Falcon Gen-3 M-Class Скачать руководство пользователя страница 118

Страница: 118 / 473

Falcon

M-Class

| User Guide

118

Table 4-61: Bandwidth Profiles Configuration parameters

Start Policer ID

The start Policer ID displays the table entries. The allowed range is
from

through

256

Number of Entries

The number of entries per page. The allowed range is from

through

256

Policer ID

The Policer ID is used to identify one of the 256 policers.

State

The administrative state of the bandwidth profile. The allowed values
are:

Enabled

: The bandwidth profile enabled.

Disabled

: The bandwidth profile is disabled.

Type

The policer type of the bandwidth profile. The allowed values are:

MEF

: MEF ingress bandwidth profile.

Single

: Single bucket policer.

Policer Mode

The colour mode of the bandwidth profile. The allowed values are:

Coupled

: Colour-aware mode with coupling enabled.

Aware

: Colour-aware mode with coupling disabled.

Rate Type

The rate type of the bandwidth profile. The allowed values are:

Data

: Specify that this bandwidth profile operates on data rate.

Line

: Specify that this bandwidth profile operates on line rate

CIR

The Committed Information Rate of the bandwidth profile. The
allowed range is from

through

10000000

kilobit per second.

CBS

The Committed Burst Size of the bandwidth profile. The allowed range
is from

through

100000

bytes

EIR

The Excess Information Rate for MEF type the bandwidth profile. The
allowed range is from

through

10000000

kilobit per second.

EBS

The Excess Burst Size for MEF TYPE the bandwidth profile. The
allowed range is from

through

100000

bytes.

Buttons

Refresh:

Click to refresh the displayed table starting from VLAN”

input fields.

<<:

Updates the table starting from the first entry in the Table,

<<:

The Excess Information Rate for MEF type bandwidth profile.

Updates the table, ending at the entry before the first entry currently
displ ayed.

>>:

Updates the table, starting with the entry after the last

entry currently displayed.

>>:

Updates the table, ending at the last entry in the table

Save:

Click to save changes.

Reset:

Click to undo any changes made locally and revert to previously saved

values.

Содержание Falcon Gen-3 M-Class


























































































































































































































































































































































































































































































Результаты поиска

Содержание Falcon Gen-3 M-Class

Отзывы:

Бренды по названию

Популярные бренды

FibroLAN Falcon Gen-3 M-Class, Руководство пользователя

Результаты поиска

Содержание Falcon Gen-3 M-Class

Отзывы:

Бренды по названию

Популярные бренды