Fiat X2-50 Cab, Руководство пользователя

Страница: 82 / 124

Equipment Details
91
SWITCHING ON THE REFRIGERATOR
(control panel)
• It is recommendable to clean the inside of
refrigerator before you switch on the
refrigerator
• Let the refrigerator run for at least eight
hours before you place food in it for the
first time.
Smart Energy Selection (SES)
When you start up the refrigerator (equipped
with Smart Energy Selection (SES)) you
should usually select the AUTO mode. The
SES system will then automatically select the
best of the three available energy sources.
The system will apply the following priority:
- mains voltage (230V)
- direct current (12V)
- liquid gas
If an energy source becomes available that
has a higher priority than the source the
refrigerator is currently using (e.g. if your
vehicle engine is started), the system will
stop using the current energy source and
switch to the energy source with the higher
priority.
If a fault occurs in one or more of the
possible energy sources, the system will not
generate an error message while an
alternative energy source is still available.
The SES system switches over automatically.
If none of the energy sources are
available, the blue LED flashes every
second and an error code is shown in the
display.
Automatic models additionally allow you to
select the desired energy source manually.
Switching on the refrigerator
Important! The memory of the SES system
saves every change made to the setting.
Consequently, the SES system will start up
on each subsequent occasion in the last-
selected setting.
1. Open the valve of the gas bottle.
2. Open the taps of the gas supply.
3. Press main switch (A). The function LED
will turn blue and all symbols on the LCD
display will light up.
4. Use the mode selection switch to select
the "Auto" function or one of the power
supplies that you want. The LCD display
will show the option you have selected.
5. Set the desired refrigerating cooling level
by means of the cooling level selection
switch (C). The LCD display will show the
cooling level setting you have selected.
A. Use the main switch to switch the
refrigerator on and off. The function LED
will turn blue. The display LCD shows the
most recent settings. After 10 seconds the
LCD display's backlight will go
out. The function LED remains blue.
B. Press the mode selector switch and the
LCD display backlight will show the
setting for 10 seconds. Pressing the mode
selector switch successive times
takes
you through the menu in the following
sequence: AUTO, manual DC (12V),
manual gas, manual mains voltage
(230V) and back to AUTO. Select either
the AUTO option or one of the other
power supplies that you want to use. The
LCD display shows the option you have
selected. If you select the AUTO option,
A = Main switch (on/off)
B = Mode selection switch
C = cooling level selection switch
D = Function LED
E = LCD display