Fiat X2-50 Cab, Руководство пользователя

Страница: 78 / 124

Equipment Details
87
a. The refrigerator can be powered by the
mains (230V), direct current (12V) or liquid
gas. Select the energy source that you
want by means of the energy source
selector switch (A). The switch has four
settings:
- direct current (DC) (12V)
- mains supply (230V)
- gas
- switched off
b. The thermostat controls the refrigerator
temperature when the refrigerator is
powered from the mains (230 V) or gas.
The refrigeration level is indicated by the
dots (the bigger the dot, the colder the
setting).
c. The flame meter shows whether the flame
is alight. The flame is alight when the red
needle of the meter moves into the green
area.
d. Pressing the manual (piezo electric)
starter produces a spark that ignites the
flame in the burner.
Electrical operation
The refrigerator can be powered by
electricity in two ways:
• DC (12V): Set the energy source selector
switch (A) to the refrigerator will now
be powered by the battery of your car or
camper.
Important! - Always use the gas connection
or mains voltage to start up the refrigerator
for the first time and to cool it. Powering
from the battery of your vehicle is suitable
only for maintaining the temperature of the
refrigerator and its contents once it has been
refrigerated.
• When powered by a vehicle battery (12V)
the refrigerator works without temperature
control (i.e. constant operation).
• Mains voltage (230V): set the power
selector switch (A) to
• Set the temperature by means of the
thermostat, rotary switch (B). (The bigger
the dot, the colder the setting).
Powering with gas
Warning! - Flammable material must be kept
away from the refrigerator.
• For selection of gas type, see the
information plate inside your refrigerator.
• For the pressure regulator model, see the
information plate inside your refrigerator.
• The type of gas container and its location
must be in compliance with the most
recent regulations. Ensure that the unit is
installed in a location with good
ventilation and make sure that the
ventilation openings in the gas container
storage location remain open.
• The changing of the gas container must
be done outside in the open air and out of
reach of any possible sources of ignition.
• It is prohibited to use gas to
power the refrigerator while you are
driving. If a road accident results in fire,
there is a danger of explosion.
• It is prohibited to use gas to
power the refrigerator in the vicinity of
petrol stations.
1. Open the valve of the gas bottle and the
gas taps.
2. Set the thermostat (B) to the highest level
(the biggest dot)
3. Set the energy source selector switch (A)
to
4. Ignite the gas flame:
Manual ignition
• Press the thermostat (B), and keep it
depressed.
• Press the button for manual ignition
several times at intervals of between 1
and 2 seconds.
• Release the thermostat when the indicator
of the flame meter enters the green area.
If it does not enter the green area, repeat
the previous step.