Electrical Systems
AIR CONDITIONING (IF FITTED):
Key with warning light to turn the AIR
CONDITIONING UNIT on or off. The air
conditioning unit does not work when the
control panel is off or if engine is running.
SPACE HEATER:
Press this key to access manual operation of
SPACE HEATING. The manual operation
screen will remain active for 5 seconds.
When manual operation is enabled the
relative icon ( ) is shown on the main
screen with the symbol ( ). Hold down the
heating key for over 3 seconds to enter the
programming page for automatic operation.
From this screen press the Enter ( ) key
repeatedly to enable and disable heating,
programme the time for turning on and off.
Use the arrow keys to increase and decrease
the value selected and the cancel key ( ) to
quit. When automatic operation of heating is
enabled the main screen shows the relative
icon ( ) and the time for turning on and off.
When the heating is on the relative warning
light above the key goes on. The heating
does not work when the control panel is off
or if engine / alternator is running.
WATER HEATER:
Key for turning WATER HEATING on and off.
When water heating is enabled the main
screen shows the relative icon ( ) with the
manual operation symbol ( ). Hold down
this key for over 3 seconds to enter the
programming page for automatic operation
of water heating. From this screen press the
Enter ( ) key repeatedly to enable and
disable water heating and programme the
time for turning on and off. Use the arrow
keys to increase and decrease the selected
value and the cancel ( ) key to quit. When
automatic operation of water heating is
enabled the main screen shows the relative
icon ( ) and the time for turning on and off.
When water heating is operating, the relative
warning light above the key goes on. Water
heating does not work when the control
panel is off or engine / alternator is running.
AWNING LIGHT:
Key for turning AWNING LIGHT on and off.
The awning light also goes on automatically
for 15 minutes in the following cases:
- when the ignition key is removed
- when the rear door is opened / closed
- when the cab door is opened
The key on the control panel has priority over
the 3 situations described above. The
awning light does not work when the control
panel is off or the engine is running.
50
Содержание X2-50 Cab
