Fiat X2-50 Cab, Руководство пользователя

Страница: 44 / 124

Electrical Systems
VIEWING:
The main screen always shows the internal
and external temperatures (if there is an
outdoor temperature probe), the time and
date if at least one of the 2 heating functions
is disabled. If there is a mains supply the
display shows the icon ( ). If a fuse burns
out on the NE184 fuser holder control unit,
the display shows the icon ( ).
Fresh / Waste Water Level:
Press this key once to view the water level in
the fresh water tank (0, 1/4, 2/4, 3/4 and 4/4)
and the level of the waste tank (0, 1/2 and
2/2). If there is an analogue probe the tank
level will be shown in linear mode, and not by
level, from 0 to 100%.The screen displays
remain active for approx. 30 seconds.
Battery Voltage:
Press the key twice to view the voltage for
the leisure and cab batteries. The screen
displays remain active for approx. 30
seconds.
Battery Charge / Discharge:
Press the key three times to view the leisure
battery charge / discharge current, or the
cab battery charge / discharge current if the
( ) function is enabled.
There is charge current when the arrow
points towards the battery; there is a
discharge current when the arrow is pointing
in the other direction. The screen displays
remain active for approx. 30 seconds.
Display contrast can be adjusted by turning
the white pin on the back of the panel.
PROGRAMMING:
Hold down this key for over 3 seconds to
enter the programming menu. Use the arrow
keys to change page. Press the enter key
( ) repeatedly to enter the page and select
the value to be changed. The arrow keys are
used to increase or reduce the selected
value, whereas the cancel ( ) key is used
to quit the function and save the figure. The
following pages are available:
- Regulation of date and time
- Regulation and enabling of clock alarm.
When the clock is enabled, the main screen
shows the icon ( ). The clock will sound
for 30 seconds; press any key to stop it.
- Enabling of tank alarms: fresh water tank
empty, waste tank full. When this happens
a buzzer is generated and at the same time
the display shows the tank viewing window.
The tank alarm does not work with the
control panel off or the engine running.
- Enabling of flat leisure and cab battery
alarm. Whenever the leisure or chassis
battery drops below 10V for over 30
seconds a buzzer is generated and at the
same time the display shows the viewing
window for battery voltage. The battery
alarm does not work with the control panel
off or the engine running.
52