Commissioning
© Festo Didactic • MPS
®
PA Compact Workstation
55
Interfaces Touch panel
Please connect the DH485 port of the communication module to 1761-NET-AIC.
3
1
2
Panel View 600+ - back view
1
PanelView Plus 600
2
DH 485 port for communication to PLC on additional communication module
3
Base configuration unit with Ethernet port for communication to PLC (Compact
Logix)
•
Observe technical data!
•
Connect the compressed air supply to the service unit.
•
Set the service unit at 6 bar (600 kPa).
•
The stations are supplied with 24 V DC voltage (max. 5 A) via a power supply
unit. Connect the 230 VAC shock proof plug of the power supply with the main
cable to the main power supply.
•
The voltage supply of the complete station is provided via the PLC or controller.
•
Heating element: Connect the 230 VAC shock proof plug of the power supply with
the main cable to the fast circuit breakter with main power supply.
5.4
Pneumatic connection
5.5
Voltage supply
Содержание MPS PA Compact
