Festo DGC G Series, Инструкции по ремонту

Страница: 11 / 136

11 / 48 Festo 07DGC-Ga_en
Entry Designation Type Note
DGC-18-…-G DGC-25-…-G DGC-18-…-G DGC-25-…-G
1 Self-tapping screw M5×20-10.9 DIN 7500-E
M6×30-
A4-70 Tightening torque 7 Nm ± 10%,
use LOCTITE 243 Tightening torque 12 Nm ± 10%,
use LOCTITE 243
2 Threaded pin DIN 913-
M5×5-45H –
3 End cap, left
4 Buffer strip
5 Seal
6 Sealing ring
7 Buffer, left
8 O-ring 1×0.6-N-
NBR70 1.8×1.2-N-
NBR75
9 Regulating screw
10 Flat-head screw DIN 920-
M3×20-4.8 DIN 84-
M3×28-4.8 Tightening torque 0.2 Nm,
use LOCTITE 243 Tightening torque 0.4 Nm,
use LOCTITE 243
11 Clamp, sealing band
12 Clamp, cover band
13 Buffer/piston seal
14 Buffer, left, sub-assembly
15 Cylinder barrel
16 Cover band
17 Sealing band
18 Socket head screw DIN 912-
M4×12-8.8 DIN 6912-
M5×16-8.8 Tightening torque 0.6 Nm,
use LOCTITE 243 Tightening torque 0.8 Nm,
use LOCTITE 243
19 Washer DIN 433, 4.3 DIN 433, 5.3
20 Slide-piston connection
21 Slide
22 Cushioning seal 8×11.6 P80 9.5×15 P80
23 Piston
24 Magnet
25 Band reverser
26 Coupling
27 Piston module
28 Buffer, right
29 Buffer, right, sub-assembly
30 End cap, right
31 Sealing ring
32 Plug screw Tightening torque 11 Nm