Festo DGC G Series Скачать руководство пользователя страница 82

Страница: 82 / 136

34 / 44

Festo 7DGC-GFa_en

Grease the second buffer.

•

Observe the greasing instructions in the table at the start of this chapter.
Insert the buffer into the piston chamber on the other side of the base

•

profile.

Grease the sealing ring and insert it into the buffer.

•

Note

Newly inserted sealing bands and cover bands are generally too long and
protrude beyond the buffer. Shorten the bands as necessary so that they do
not protrude beyond the contact surface of the buffer (see band fastening on

the other side of the base profile).

Apply the band clamping mechanism to the sealing band and cover band.

•

Apply Loctite 243 to the socket head screw and tighten it using the appro-

•

priate torque (see table).

Type

Torque

DGC-50-…-GF

1.0 Nm ±20%

DGC-63-…-GF

1.0 Nm ±20%

Align the slide centrally with the piston.

•

Place the slide-piston connection on the coupling.

•

Apply Loctite 243 to the socket head screws for the slide-piston connection

•

and tighten them slightly so that the slide-piston connection is positioned
at 1-2 mm from the slide.

Содержание DGC G Series









































































































































Результаты поиска

Содержание DGC G Series

Отзывы:

Похожие инструкции для DGC G Series

Бренды по названию

Популярные бренды

Festo DGC G Series, Инструкции по ремонту

Результаты поиска

Содержание DGC G Series

Отзывы:

Похожие инструкции для DGC G Series

Бренды по названию

Популярные бренды