Festo DGC G Series, Инструкции по ремонту

Страница: 15 / 136

15 / 48 Festo 07DGC-Ga_en
Entry Designation Type Note
DGC-50-…-G DGC-63-…-G DGC-50-…-G DGC-63-…-G
1 Self-tapping screw M8×55-10.9 Tightening torque 25 Nm ± 20%,
use LOCTITE 243 Tightening torque 30 Nm ± 20%,
use LOCTITE 243
2 End cap, left, sub-assembly
3 End cap, left
4 Buffer strip
5 O-ring 11.5×1.5-N-NBR75
6 O-ring 32×2.5-N-
NBR70 42×3-N-
NBR70
7 Buffer, left
8 O-ring 4×1.5-N-
NBR70 6×1.5-N-
NBR70
9 Regulating screw
10 Socket head screw DIN 912-M4×40-10.9 Tightening torque 1.0 Nm ± 20%, use LOCTITE 243
11 Clamp, sealing band
12 Clamp, cover band
13 Buffer/piston seal
14 Buffer, left, sub-assembly
15 Cylinder barrel
16 Cover band
17 Sealing band
18 Threaded pin Tightening torque 5.0 Nm ± 20%, use LOCTITE 243
19 Slide-piston connection
20 Blanking plug
21 Washer
22 Socket head screw DIN 912-M8×50-10.9 Tightening torque 20 Nm ± 20%, use LOCTITE 243
23 Blanking plug
24 Spring pin SG 12×15
25 Blanking plug
26 Slide
27 Piston
28 Compression spring VL-5/2-4.0
29 Buffer, right
30 Buffer, right, sub-assembly
31 End cap, right
32 End cap, right, sub-assembly
33 Sealing ring OL-1/2 OL-M22
34 Plug screw Tightening torque 16 Nm Tightening torque 18 Nm
35 Socket head screw DIN 912-
M8×16-10.9 DIN 912-
M8×25-10.9 Tightening torque 20 Nm ± 20%, use LOCTITE 243