Festo DGC G Series Скачать руководство пользователя страница 23

Страница: 23 / 136

23 / 48

Festo 07DGC-Ga_en

Apply Loctite 243 to both threaded pins to secure the toggle levers and

•

tighten them using the appropriate torque (see table).

Type

Torque

DGC-8-…-G

1.0 Nm

DGC-12-…-G

1.0 Nm

Remove the feeler gauge.

•

Put the side stops on the slide.

•

Apply Loctite 243 to both mounting screws and tighten them using the

•

appropriate torque (see table).

Type

Torque

DGC-8-…-G

0.3 Nm

DGC-12-…-G

0.3 Nm

Fit the buffers and place the end caps on the cylinder barrel as described in

•

chapter 4.1.2.

Replacing the coupling on the slide

4.1.5

If the coupling (magnifying glass) is faulty or has been lost, it can be replaced
as follows.

Remove the slide as described in

•

chapter 4.1.1.

Note

The socket head screw for fastening the coupling is filled with thread locker.
To open the screw the thread locker has to be removed using suitable tools.

Remove the socket head screw completely.

•

Содержание DGC G Series









































































































































Результаты поиска

Содержание DGC G Series

Отзывы:

Похожие инструкции для DGC G Series

Бренды по названию

Популярные бренды

Festo DGC G Series, Инструкции по ремонту

Результаты поиска

Содержание DGC G Series

Отзывы:

Похожие инструкции для DGC G Series

Бренды по названию

Популярные бренды