31
Figure 5-7: Transfer settings
Click Open File to select a parameter settings file (.cdi). The parameter settings appear in the window.
The .cdi file contains information including object address, object value and readout result. If readout result
is “False”, “Invalid” will appear immediately in red ion the Result fied.
Click Write to Controller to get the Check Value and Result. The “False” Result means the value has
not been written successfully, probably because the object doesn’t exist in the controller. Click Save in
EEPROM and Reboot to activate all parameters.
5.5 Digital IO functions
Click menu item Controller->Digital IO Functions or click the
button. The following window
appears. Function and polarity are shown as defaults here.
Figure 5-8: Digital IO
