Festo CMMB-AS-0x Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 92

background image

16

4.3 Easy Use function

The Easy Use function helps users setup the CMMB motor controller for the main types of applications in a
very short time. The LED panel guides the userstep by step through the settings of the few most important
parameters in order to prepare the controller for the desired application. The servo control loops of the
motor controller are pre-configured to useful default settings which are adequate for many applications at as
they are. A robust auto-tuning function can be used additionally to identify the applied mechanical system
more precisely. After that, the user only needs to adjust the controller’s servo performance with the stiffness
parameter.

4.3.1 Setup process with Easy Use function

The process for setting up the CMMB motor controller with the Easy Use function follows a simple procedure.
Step 1: The parameters of the EASY panel menu have to be accessed and confirmed, or set one by one. The
auto-recognized  motor  type  can  be  confirmed,  the  control  interface  has  to  be  selected,  interface-related
main  parameters  have  to  be  set  and  the  mechanical-  and  control-application  types  must  be  chosen.
Afterwards, these parameters have to be saved and the controller has to be rebooted. As a result of these
settings the controller is configured for a suitable I/O setting and the servo control loop parameters are set
to matching defaults. The controller is ready for use for a wide range of standard applications and can be
tested.
Step 2: If the servo control performance of the controller has to be further improved, the tunE panel menu
must be accessed. With the help of the functions in this menu, the controller can start an auto-tuning motor
run in order to identify motor load conditions and to measure the inertia. After that the controller calculates
the inertia ratio, which is the ratio of the measured inertia and the motor inertia. Depending on the obtained
inertia ratio the controller defines a suitable stiffness value for the servo behavior. Using the inertia ratio and
the stiffness value the controller tunes the servo loops automatically.
Step 3: Inside the tunE menu the stiffness can be adjusted up/down simply by panel buttons. The stiffness
adjustment can be done also during the testing of the application, while the controller is being commanded
via the selected command interface. After finding the best value for stiffness the tunE parameters need to be
saved  and  the  controller  is  finally  ready  for  use.  If  the  adjustment  of  the  stiffness  does  not  result  in  the
required performance, the PC software “CMMB configurator” can be used to for further optimisation.

START

Execute the flow chart of EASY

Jog the machine,

evaluate the performance

Measure the Inertia

Ratio by Tn03

Adjust the

Stiffness by Tn01

Jog the Machine,

evaluate the performance

END

Adjust Gain by PC

Not good

Good

Not Good

Can not figure out by

adjusting the stiffness

Good

Figure 4-2: Flow chart of the Easy Use function

«
...
20
21
22
23
24
...
»

Содержание CMMB-AS-0x





























































































Отзывы:

Нет отзывов

Похожие инструкции для CMMB-AS-0x

Бренд: ABB Страницы: 63

Бренд: Quickmill Страницы: 3

Бренд: Eaton Страницы: 6

Бренд: Calpeda Страницы: 4

Бренд: CAME Страницы: 98

Бренд: CAME Страницы: 16

Бренд: CAME Страницы: 8

Бренд: Ebyte Страницы: 38

Бренд: EBS Страницы: 30

Бренд: MAKOT Страницы: 6

Бренд: Water Specialist Страницы: 60

Бренд: National Instruments Страницы: 17

Бренд: Davey Страницы: 12

Бренд: Daikin McQuay Страницы: 8

Expedition Double Jogger

Бренд: BABYTREND Страницы: 18

Бренд: Westfalia Страницы: 18

Бренд: bluelab Страницы: 39

Бренд: SOMFY Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды