Festo CMCA series, Электромонтажные работы

Страница: 31 / 40

4 Mounting and installation
Festo – GDCP-CMCA-INST-EN – 1211a – English 31
Key actuator “brake release”(S3)
Terminal strip Terminal Description
X2 225 Pin 13, (S3)
X6 618 Pin 14, (S3)
Tab. 4.16
4.2.9 Operating mode selection
Terminal strip Terminal Terminal Description
X6 611 612 With the key actuator (S2), you can select locally
between the manual operation and automatic opera-
tion modes (status on delivery)
614 615
611 610 With the external higher-order controller, you can
select locally between the manual operation and
automatic operation modes
614 613
Tab. 4.17
Fig. 4.6 Operating mode selection, external Fig. 4.7 Operating mode selection, local
Operating mode selection by means of higher-order controller
If the operating mode selection is made through a higher-order controller, you must make two poten-
tial-free relay contacts available there.
Terminal strip Terminal Description
X2 224 +24 V DC
X6 610 Manual operation
613 Automatic operation
Tab. 4.18
Note
As supply voltage for these contacts, the supply for terminal X2-224 must be used