2
Transport and storage
Festo – GDCP-CMCA-INST-EN – 1211a – English
9
2.3.1
Mounting plate design CMCA-…-C-…
Removing transport packaging
1. Loosen and remove the lower screws of the
cover.
2. Lift the cover up and off.
Remove the packaging foil
3. Cut the foil parallel to the contour of the
product with an appropriate tool. When cut-
ting, make sure that you do not damage or
scratch the components of the control system.
4. Pull the foil up and off. Carefully remove the
bag with desiccant and dispose of it in accord-
ance with the instructions (
chapter 7.3).
Loosen mounting plate
5. Loosen and remove the screws with which the
mounting plate is screwed to the pallet.
6. With two people, lift the control system off the
pallet and bring it to the installation site.
Fig. 2.1
