FERREX 700710 Скачать руководство пользователя

Страница: 4 / 44

52cc 2 Stroke Brushcutter / Line Trimmer

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL: №. SBC52 • 02/2020 • 700710

(toll free)

Pack contents / parts

Congratulations on the purchase of your FERREX® 52cc 2 Stroke

Brushcutter / Line Trimmer. When you open your packaging, first remove

all items and check there are no parts damaged or missing. If you find

anything wrong, do not operate the product until the parts have been

replaced or the fault has been rectified. Failure to do so could result in

serious personal injury.

IMPORTANT INFORMATION.

NOTE:

This is a 2 stroke Line Trimmer and requires pre-mixing fuel with

2-stroke oil BEFORE starting. Fresh unleaded fuel must be used in this

unit. Do NOT use Ethanol based fuels.

Intended use of the 52cc 2 Stroke Brushcutter / Line Trimmer

NOTE:

This product is for private domestic DIY use only.

It is not suitable for commercial or trade use.

This Line Trimmer has been designed for trimming lawn edges and

grass around shrubs and trees.

The Brushcutter has been designed for cutting and clearing grass,

thick weeds, vegetation and shrubs.

Contents of carton

1 x Brushcutter / Line Trimmer

1 x Brushcutter / Line trimmer Guard (+ 4 x bolts + 4 x nuts + 8 x washers) (not fitted)

1 x 3T Brushcutter Blade (not fitted)

1 x Spool & Line Assembly (not fitted)

1 x P handle (+ 4 x hex bolts + 4 x nuts + 8 x washers) (not fitted)

1 x Double Shoulder Strap Harness

1 x Spark Plug Spanner / Blade Nut Wrench / Screwdriver Combination

2 x Allen Key (4mm & 5mm)

1 x 8mm/10mm Spanner

1 x Flathead Screwdriver

1 x Fuel / Oil Mix bottle

1 x Instruction Manual

1 x Quick Start Guide

1 x Warranty Card & details

Содержание 700710













































Результаты поиска

Содержание 700710

Отзывы:

Похожие инструкции для 700710

Бренды по названию

Популярные бренды

FERREX 700710, Руководство пользователя

Результаты поиска

Содержание 700710

Отзывы:

Похожие инструкции для 700710

Бренды по названию

Популярные бренды