52cc 2 Stroke Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: [email protected]
1300 889 028
MODEL: №. SBC52 • 02/2020 • 700710
(toll free)
28
Mixing Fuel and Oil
MOTOR FUEL: MIX AT 40:1 ONLY
For example: For 1 litre of unleaded petrol add 40ml of 2 stroke oil.
For 5 Litres of unleaded petrol add 125ml of 2 stroke oil.
IMPORTANT.
Use good quality air cooled 2-stroke engine oil. This product is
powered by a 2-stroke engine and requires pre-mixing fuel with 2-stroke oil.
1. Use fresh unleaded fuel. Do not use ethanol based fuels . You should use
2-stroke oil specifically made for heavily stressed two-stroke engines.
2. Mix the fuel and oil in an approved container.
Never mix fuel and oil directly in the line trimmer
fuel tank (6). Use the supplied fuel / oil mix bottle
(13) included with this product. (Fig. AI)
3. Using the supplied fuel / oil mix bottle (13), fill
to the 1:40 mark, then fill with oil to the 600ml
marking. (Fig. AJ)
WARNING.
Never use any type of pre-mixed
fuel/oil from fuel stations as these may
include special blends solely intended
for use in mopeds. motorcycles, etc.
3. Mix the fuel and oil thoroughly and
also each time before fuelling.
4. Always pre-mix in small quantities.
Never mix quantities larger than
what will be used in a 30-day
period.
NOTE:
The fuel / oil mix bottle (13)
provided is NOT for the storage of fuel.
This container is solely for mixing of
fuel and oil only.
Ensure to keep this container in a safe storage location, empty of fuel and out
of reach of children.
AI.
AJ.
40:1
2 STROKE
OIL
500ml
FUEL
Preparation
