AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]
1300 889 028
MODEL: №. SBC52 • 02/2020 • 700710
52cc 2 Stroke Brushcutter / Line Trimmer
17
2. Locate the spindle lock entry hole (19) and align
it with the hole on the bottom silver protector.
Use the 4mm allen key (37) and insert through
both holes to lock the spindle (Fig Q), then using
the spark plug spanner / blade nut wrench /
screwdriver combination tool (36), use the blade
nut wrench to remove the blade nut (26) by
rotating in a clockwise direction. (Fig R)
3. Remove the outer flange (29). Place the 3T
brushcutter blade (28) over the inner flange (30),
and then replace the outer flange, followed by
the protector (27), then secure the blade bolt by
hand in an anti-clockwise direction.
NOTE:
Ensure the direction of rotation of the
blade as indicated by an arrow on the blade
corresponds with the arrow direction on the top
of the guard.
4. To fully secure the blade bolt, again insert the
4mm allen key (37) through both holes to lock the
spindle (Fig S), then using the spark plug spanner
/ blade nut wrench / screwdriver combination
tool (36), use the blade nut wrench to secure
the blade nut by turning in an anti clockwise
direction. (Fig T)
5. Ensure the 3T brushcutter blade (28) is secured
tight before removing the hex key (37) from the
spindle hole.
A.
A.
A.
R.
S.
A.
Q.
T.
