AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]
1300 889 028
MODEL: №. SBC52 • 02/2020 • 700710
52cc 2 Stroke Brushcutter / Line Trimmer
27
Tips for operating the Line Trimmer
IMPORTANT.
Petrol line trimmers transmit vibrations to the operator during
use. These vibrations can generate increased fatigue. For this reason, we
recommend taking regular breaks during work. We also recommend taking
a break after a few hours of work to rest the engine. If abnormal noise or
vibration occurs during operation, turn the line trimmer off immediately and
have the problem corrected.
Keep a firm grip on the trimmer with both hands while in operation.
The trimmer should be held at a comfortable position with the rear handle
about hip height.
Always operate the trimmer at full throttle. Cut tall grass from the top down
to prevent grass from wrapping around the spool which may cause the
trimmer to overheat.
NOTE:
If grass becomes wrapped around the spool, stop the engine,
disconnect the spark plug wire, and remove the grass.
Tips for cutting
WARNING.
Beware of bystanders at all times.
• Cut the grass like you are in a corridor about 1.5m wide.
Move step by step, moving the machine from left to right and vice-versa.
Make sure at each step that you are still well balanced on your feet
• Keep the line trimmer tilted towards the area being cut
• Let the tip of the line do the cutting. Never force the spool into
uncut grass.
• Running the line into fences, stone and brick walls, curbs, and wood
causes extra line wear, even breakage.
• Do NOT run the bump knob (34) on the ground during the cutting
process. The bump knob (34) should only touch the ground when the
bump knob (34) is tapped on the ground to extend the cutting line.
