AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]
1300 889 028
MODEL: №. SBC52 • 02/2020 • 700710
52cc 2 Stroke Brushcutter / Line Trimmer
15
4. Use the 4mm allen key (37) to fix the hex bolt,
and use the 8mm spanner to tighten the nut in a
clockwise direction. Ensure the hex bolts are all
engaged with the nuts and the brushcutter guard
(17) is locked in place. (Fig. J)
If proceeding to use as the brushcutter, the 3T
brushcutter blade (28) needs to be assembled.
Refer to the “Fitting the Brushcutter Blade instructions”.
If proceeding to use the line trimmer, the clip-on line
trimmer guard attachment (33) and spool and line
assembly (35) requires assembly.
Refer to the “Fitting the Clip-on Guard Attachment
to the Line Trimmer” and “Fitting the Spool and Line
assembly on the Line Trimmer” for these instructions.
Fitting & Adjusting the Double Strap Shoulder
Harness
WARNING.
The Double strap shoulder harness
(31) must be fitted before use of the product .
This includes both combinations of the brushcutter
or the line trimmer.
1. Place the shoulder straps over each shoulder so
that the 2 padded shoulder straps are located
on your front side (Fig. K), with the black plastic
support where the straps interweave, located on
your back (Fig. L)
2. Connect the clip at the front to secure the double
strap shoulder harness (31) into position on your
body. (Fig. M)
NOTE:
The side pad guard will be located on your
right hand side.
L.
J.
M.
K.
