Ferno Transcend Chair Series Скачать руководство пользователя страница 6

Страница: 6 / 44

Safety Information

1.6 Safety and Instruction Labels

Safety and instruction labels place important information from the

users’ manual on the chair. Read and follow label instructions. Replace

worn or damaged labels immediately.

1.7 Compliance

The chair meets the following standards:

●

Medical Device Regulation (EU)2017/745, Annex 1, Section

23.4 and 21 CFR 801.5

as established by the European Union

●

IEC 60601-1-2:2014:

Electrical and electromagnetic testing

●

IEC 60601-1-12:

Temperature and vibration testing

●

IP56:

Ingress Protection rating. Tested in compliance with dust and

water infiltration standards.

●

EN 1865:

Performance and crash-test standards

●

RoHS-2:

Meets the requirements of EU Directive 2011/65/EU

and as ammended by EU Directive 2015/863 (“RoHS-3”) on the

restriction of the use of certain hazardous substances.

Symbol

Feature

General Warning Label: General injury warning; read

the users’ manual; two trained operators; chair load

capacity.

Ratings Label: Product name, general injury warning,

read the users’ manual, manufacturer.

Pinch point. Keep hands clear.

Pinch point (belts). Keep hands clear.

Do not lubricate (track chair only).

Содержание Transcend Chair Series













































Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды

Ferno Transcend Chair Series, Руководство пользователя

Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды