© Ferno / 234-3801-00 / August 2021
25
Spotter
Foot-end
Operator
Head-end
Operator
Using the Chair
USING THE MANUAL TRACK CHAIR TO DESCEND STAIRS
1.
Head-end Operator:
Roll the chair near the stairs and engage the
wheel locks (if equipped).
2.
Head-end Operator:
Open the track system (See “Track System”
on page 17). Verify that it has locked.
3.
Head-End Operator:
Raise the lift bar to the desired position and
verify that it is locked.
4.
Foot-end Operator:
Extend the foot-end lift handles to the
desired positions and verify that all handles are locked.
5.
Spotter:
Stand below the foot-end operator with a hand on the
operator’s back to help steady and guide him/her throughout the
descent (Figure 23).
6.
Head-end Operator:
Disengage the wheel locks.
7.
Both Operators:
Together, tilt the chair back until the belts
engage the floor.
8.
Both Operators:
Working together, guide the chair slowly
forward and downward until the tracks engage two or three
steps. This establishes the glide angle.
9.
Both Operators:
To maintain the glide angle as you descend,
work together and:
○
Head-end Operator:
Apply slight downward pressure on the
extended lift bar.
○
Foot-end Operator:
Apply slight upward pressure on the foot-
end lift handles.
10.
Both Operators:
At the bottom of the stairway, tilt the chair onto
all four wheels.
11. If the chair has reached the destination, prepare the chair for rolling
by retracting the foot-end lift handles, rear lift handles, and/or
lowering the lift bar to a comfortable height. Close the track system.
12. To continue the descent, adjust the lift handles and lift bar as
needed to maneuver the chair to the next stairway.
23
Содержание Transcend Chair Series
Страница 39: ... Ferno 234 3801 00 August 2021 39 Parts and Service 1 5 6 8 4 9 2 3 7 ...
Страница 42: ... Ferno 234 3801 00 August 2021 42 Date Maintenance Performed By Maintenance Record MAINTENANCE RECORD ...
Страница 43: ... Ferno 234 3801 00 August 2021 43 NOTES ...
Страница 44: ...Aviation Military Mortuary EMS Rescue 70 Weil Way Wilmington OH 45177 Ferno 234 3801 00 August 2021 ...