Ferno Transcend Chair Series Скачать руководство пользователя страница 37

Страница: 37 / 44

Setup

8.3 Attaching Patient Restraints

Use patient restraints to help hold the patient on the chair. Each restraint

must capture

both

the aluminum chair frame and the seat or back panel

(Figure 34). Follow local protocols when attaching restraints.

USING TWO-PIECE RESTRAINTS

1. Feed the loop of a restraint strap through a slot in the seat or back

panel.

2. Wrap the strap around the aluminum chair frame and feed the male

or female buckle through the loop, then pull the strap tight against

the frame and panel.

3. Repeat Steps 1-2 for the other half of the restraint.

USING ONE-PIECE RESTRAINTS

Note:

Two-piece restraints are recommended.

1. To attach the seat-panel restraint, lay the restraint across the

top of the seat panel and feed the male and female ends of the

restraint down through the slots.

2. Wrap the restraint around the aluminum chair frame on each side

of the chair, capturing both the panel

and

the frame.

3. Buckle the restraint and adjust the length.
4. Repeat Steps 1-3 to attach the back-panel restraint.

8.4 Restraint Configurations

Follow local protocols when configuring and using restraints. Two

possible configurations are described below.

HORIZONTAL CONFIGURATION

Use one restraint for the chest and one restraint for the lap (Figure 35).

Use additional restraints as needed.

1. Attach the chest straps through the vertical slots in the back

panel.

2. Attach the lap straps through the seat panel slots.

CRISS-CROSS CONFIGURATION

Use two restraints for the torso and a third restraint for the lap (Figure

35).

1. Attach one strap of a restraint through a horizontal slot on the

back panel of the chair.

2. Attach the mating strap of the same restraint through the seat

panel slot on the opposite side of the chair.

3. Repeat with the second restraint, attaching its straps to opposite

sides of the chair.

4. Attach the lap restraint through the seat-panel slots.

NOTICE

Restraint rules (also follow your local protocols):

●

Use a minimum of two restraints.

●

One restraint must be secured across the chair seat to

help hold the patient on the chair.

●

Each restraint or strap must capture the aluminum

chair frame and the plastic panel.

Horizontal

Criss-Cross

Содержание Transcend Chair Series













































Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды

Ferno Transcend Chair Series, Руководство пользователя

Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды