Ferno Transcend Chair Series Скачать руководство пользователя страница 26

Страница: 26 / 44

USING THE POWERTRAXX TO DESCEND STAIRS

Head-end Operator:

Roll the chair near the stairs and engage the

wheel locks.

Head-end Operator:

Open the track system (See “Track System”

on page 17). Verify that it has locked.

Both Operators:

Raise the lift bar and/or extend the foot-end lift

handles to the desired positions and verify that all handles are

locked.

Spotter:

Stand below the foot-end operator with a hand on the

operator’s back to help steady and guide him/her throughout the

descent (Figure 24).

Head-end Operator:

Disengage the wheel locks.

Both Operators:

Together, tilt the chair back until the belts

engage the floor.

Head-End Operator:

Press

control button to start the power

system in the proper direction to descend the stairs (Figure 24).

Both Operators:

Together, and using the chair power, move the

chair slowly forward and downward until the tracks engage two

or three steps. This establishes the glide angle.

Both Operators:

Move in a straight line and at a steady pace

down the stairs, allowing the motor to do the work. To maintain

the glide angle as you descend, work together and:

○

Head-end Operator:

Apply slight downward pressure on the

extended lift bar.

○

Foot-end Operator:

Apply slight upward pressure on the foot-

end lift handles.

10.

Both Operators:

Continue moving the chair in a straight line to

the bottom of the stairway, then tilt the chair onto its wheels as
the Head-end Operator stops pressing the

control button.

11. If the chair has reached the destination, or if needed to maneuver

the chair to the next stairway:

○

Foot-end Operator:

Retract the foot-end lift handles.

○

Head-End Operator:

Close the track system. Adjust the lift bar

to a comfortable height.

○

Both Operators:

Roll the chair.

12. To continue the descent, reposition the chair to continue the

descent. Use the chair wheels to turn and position the chair for

the next stairway.

Spotter

Foot-end

Operator

Head-end

Operator

Descend

Using the Chair

Содержание Transcend Chair Series













































Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды

Ferno Transcend Chair Series, Руководство пользователя

Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды