Ferno Transcend Chair Series Скачать руководство пользователя страница 27

Страница: 27 / 44

Using the Chair

6.7 Transporting the Patient Up Stairs

Ferno recommends that the two operators face each other when

transporting a patient on stairs and that a third trained person “spot” for

the foot-end operator. In some cases, the foot-end operator may be able

to descend the stairs facing forward, with his back to the patient. Follow

your local protocols for using chairs.
Ferno recommends you visualize a “landing zone” at the top or bottom

of the stairway. The landing zone should provide enough clear, safe

space for the chair to be set on all four wheels, away from the edge of

the stairway. In a narrow stairway, you may need to retract the handles

between each flight of stairs.
If the operators tire or need to attend the patient while on stairs, see

“Pausing On the Stairs” on page 29.

USING THE CARRY CHAIR OR MANUAL TRACK CHAIR

TO ASCEND STAIRS

If the chair is equipped with optional rear lift handles, the head-end

operator may grasp those handles instead of the lift bar.

Both Operators:

Roll the chair to the bottom of the stairs and

position it with the patient’s back to the stairs.

Head-End Operator:

Raise the lift bar to the desired position and

verify that it is locked. Or, use the rear lift handles, if your chair has

rear lift handles.

Head-End Operator:

If the chair has a manual track system, do

not open the track system.

Spotter:

Stand above the head-end operator with a hand on the

operator’s back to help steady and guide him/her throughout the

ascent.

Foot-End Operator:

Extend the foot-end lift handles to the

desired position and verify that both handles are locked.

Both Operators and Spotter:

Working together, the operators

grasp the lift bar and lift handles and carry the chair up the stairs.

The spotter keeps a hand on the head-end operator’s back and

provides verbal guidance.

Both Operators:

At the top of the stairs, the head-end operator

sets the rear wheels of the chair on the floor and rolls the chair

backward until the front wheels are securely on the floor.

8. If the chair has reached the destination, prepare the chair for

rolling by retracting all handles and/or lowering the lift bar to a

comfortable height.

9. To continue the ascent, adjust the lift handles and lift bar as

needed to maneuver the chair to the next stairway.

WARNING

Track Chair Models: Using the chair with an unlocked

track system can cause injury. Verify that the track system

is locked before transporting the patient.

NOTICE

When the track system is in use, move the chair only in a

straight line. Do not twist or turn the chair while using the

track system as the belts may become dislodged from the

track. Set the chair on its wheels between stairways, to turn

corners, or to change direction.

Содержание Transcend Chair Series













































Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды

Ferno Transcend Chair Series, Руководство пользователя

Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды