Ferno Transcend Chair Series, Руководство пользователя

Страница: 22 / 44

© Ferno / 234-3801-00 / August 2021
22
Using the Chair
6.3 Folding and Unfolding the Chair
The red lock release lever below the front edge of the seat (Figure 20)
disengages the lock for folding and unfolding the chair. Before seating
a patient, verify that the chair is completely unfolded and the lock is
engaged.
TIP:
The chair lock release lever must be disengaged before you begin
folding or unfold the chair. Pull the release lever forward, then fold or
unfold the chair.
UNFOLDING THE CHAIR
1. Stand beside the chair and grasp the lift bar with one hand and
the lock release lever with the other hand.
2. Pull the release lever forward (Figure 20), then open the chair until
it fully unfolds and the lock engages.
3. To verify the lock has engaged, hold the lift bar while pulling up
on the chair frame at the front of the seat. The chair will not fold if
the lock is engaged.
FOLDING AN OPEN CHAIR
1. Buckle the restraints and arrange the straps to prevent interference
with folding the chair.
2. Roll the chair backward to reverse the swivel wheels.
3. Standing at the side of the chair, grasp the lift bar with one hand
and the lock release lever with the other hand.
4. Pull the release lever forward, then fold the seat toward the back-
panel frame.
AS YOU FOLD THE SEAT:
Tilt the chair forward to keep the swivel
wheels rotated outward (Figure 21). This prevents the wheels
from holding the frame away from the seat and allows the lock to
engage.
5. Press the seat against the back-panel frame until the lock engages
(Figure 21).
6. Verify the lock has engaged by pulling the seat away from the
back-panel frame without pulling the lock release lever. The seat
will not move if the lock is engaged.
Note:
If the swivel wheels prevent the chair from locking in the folded
position, hold the chair at a greater tilt to allow the swivel wheels to rotate
away from the chair frame.
20
Release Lever
21
Swivel Wheels