Ferno Transcend Chair Series Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 44

background image

© Ferno / 234-3801-00 / August 2021

34

Maintenance

7.10 Interconnect Cord for PowerTraxx

The USB interconnect cord physically connects the controller with the

motor. It serves two purposes:

●

(Optional) The interconnect cord can be connected permanently

to bypass the wireless system. If you decide to use the interconnect

cord permanently, arrange the cord so it will not be pinched by

opening, closing, or using the chair.

Note:

The interconnect cord does not disable the wireless system when it

is connected.

●

The interconnect cord can re-establish the wireless link between

the controller and motor. The controller and motor are linked

during assembly and should not lose contact during normal use. If

the connection is lost, do the following to re-link the components:

1. Plug in the

USB-C end of the cord to the port on the controller

2. Remove the cover and plug the USB-A end the cord into the port

on the motor (Figure 31).

3. The wireless connection light

will flash blue (Figure 31) when

the cord is connected and will then turn green after the controller

and motor are paired.

4. Disconnect the interconnect cord and insert the cover into the

USB-A port.

USB-C Port

USB-A Port

31

Wireless Light

«
...
32
33
34
35
36
...
»

Содержание Transcend Chair Series













































Отзывы:

Нет отзывов

Похожие инструкции для Transcend Chair Series

Quickie Revolution

Бренд: Quickie Страницы: 47

Бренд: Quickie Страницы: 260

Sopur Easy Life T

Бренд: Sunrise Medical Страницы: 104

Бренд: Invacare Страницы: 136

Бренд: Meya Страницы: 80

Бренд: Kids UP Страницы: 28

Бренд: R82 Страницы: 32

Бренд: Permobil Страницы: 100

Compass Sport GP605 CC

Бренд: Golden Страницы: 36

Бренд: NRS Healthcare Страницы: 4

Бренд: NART Access Страницы: 10

Бренд: Karma Страницы: 96

Бренд: Netti Страницы: 36

Бренд: KYMCO Страницы: 42

Q7 Active Rigid (welded)

Бренд: Quickie Страницы: 86

Бренд: TA Service Страницы: 76

B-918116 Series

Бренд: Bobrick Страницы: 2

ChairPro 909367

Бренд: Skil-Care Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды