manualshive.com logo in svg

Ferno POWER X SN-POW1001, Руководство пользователя

Поделиться
Скачать
Ferno POWER X SN-POW1001 Скачать руководство пользователя страница 40

FERNO/MAN/0721/216-R22/UK

40

7.14 - Using BabyPod on POWERX

Please refer to the BabyPod user manual for the procedure for 
attaching and using BabyPod on a trolley.
Attachment of BabyPod to POWERX is the same procedure as any 
other trolley, where the 2 fixing straps are fed around and under 
the belly of the trolley and then re-attached to the buckles on the 
opposite  side of the BabyPod. The BabyPod foot-end fixing strap 
should be attached to the trolley foot-end red cross-handle. 

Note that when using SX cotsides on POWERX, the raised-height 
SX cotsides (FWESX35T) should be used when using BabyPod, to 
allow the fixing straps to be fed down and under the trolley. 

BabyPod strapped to POWERX 

7.12 - Strap attachment points (4-point 

harness) 

A summary of the various attachment points on PowerX with 
4-point harness is as per below list:

1. Attachment point for ACR lower fixing straps
2. Attachment point for Adult harness lower (waist) cross-straps
3. Attachment point for Pedimate loop fixing strap for attaching 
Pedimate to. 
4. Attachment point for Adult thigh/leg straps
5. Attachment point for Adult lower-leg/ankle straps

Preparing to Transport a Patient

7.13 - Strap attachment points (Cross-

Strap Harness) 

A summary of the various attachment points on PowerX with 
Cross-strap harness 

Cross-strap harness is as per below list:

1. Attachment point for ACR lower fixing straps
2. Attachment point for buckle for crossover strap 
3. Attachment point for bottom end of crossover strap. End of 
Crossover strap also incorporates loop for attaching Pedimate.
4. Not used
5. Attachment point for lower-leg strap

Содержание POWER X SN-POW1001



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды