Ferno POWER X SN-POW1001, Руководство пользователя

Страница: 14 / 50

FERNO/MAN/0721/216-R22/UK
14
To get maximum shortening to the same length as the trolley
base, ensure that the backrest is fully upright and the leg position
set to the maximum-bend knee contour position, if clinically
viable according to the patient being transported.
To return POWERX to its normal length, ensure the wheel brakes
are engaged and again at each end, operate the shortening
levers and pull the frame towards you as far as it will go until it
locks into place at fullest extension.
Note that the trolley will shorten to a minimum length of 1540
mm with a stowage net attached at head-end and locks into
position. With the stowage net removed the head-end will
shorten even further, to a minimum overall length of 1450 mm.
However the head-end frame intentionally does not lock at this
position and should only be used when manoeuvring through
lifts/tight spaces. The trolley should not be loaded in a vehicle
when fully shortened to 1450 mm.
POWERX in shortened position
Push release levers for shortening trolley
Push frame in to shorten whilst pushing in both red
knobs
Once frame has fully shortened, let go of the two red
push knobs and lock the frame by pulling slightly
towards you
The second version of trolley shortening mechanism utilises a
push release lever with red knob at the end. To shorten the trolley
at foot-end or head-end, again first ensure that the wheel brakes
are engaged. Pushing the two release levers away from yourself
on both sides of the trolley end-frame, at the same time push the
whole frame in and it will shorten. Once reached the end-point,
release the levers and pull the frame back towards you and it will
lock into position.
6.8 - Shortening Trolley (Nov 2020
onwards)
6 - OPERATING THE TROLLEY FEATURES
Operating the Trolley Features