![Ferno POWER X SN-POW1001 Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/ferno/power-x-sn-pow1001/power-x-sn-pow1001_user-manual_554400032.webp)
FERNO/MAN/0721/216-R22/UK
32
4-point harness,chest strap and leg straps applied
Next adjust the shoulder straps such that they are firmly held
against the patient’s shoulders and then adjust the waist straps
so they are holding the patient in position.
To tighten a strap, pull the top strap whilst feeding the
underneath strap through the buckle (feed and pull).
To loosen strap, pull the lower strap whilst feeding the strap
above through the buckle.
Chest strap fastened
Shoulder and waist strap tightened
7 - PREPARING TO TRANSPORT A PATIENT
Preparing to Transport a Patient
7.4 - Deploying 4-point Harness, chest
and leg straps (cont....)
Warning: For safety and CEN compliance the chest
strap must always be used and fastened.
Once the shoulder and waist straps have been attached and
tightened, the cross-chest strap then needs to be attached and
tightened
Buckle for adjustment of strap on shoulders & waist
Bring the two waist straps up from each sides and place these on
the patient's lap.
Waist straps
Bring the two metal 'L' buckles on the end of each shoulder strap
together to make a T shape and then place them through the
tang of the patient's right-hand waist strap and then clip into the
buckle on the left-side waist strap..
Fastening harness buckle
Next fasten the 2 legs straps, ensuring they are holding the
patient's legs firmly, but not too tightly.
Содержание POWER X SN-POW1001
Страница 48: ...FERNO MAN 0721 216 R22 UK 48...
Страница 50: ...FERNO MAN 0721 216 R22 UK 50...