manualshive.com logo in svg

Ferno POWER X SN-POW1001, Руководство пользователя

Поделиться
Скачать
Ferno POWER X SN-POW1001 Скачать руководство пользователя страница 34

FERNO/MAN/0721/216-R22/UK

34

Red Crossover strap attached to buckle with red strap 

at other side of trolley

7 - PREPARING TO TRANSPORT A PATIENT

Preparing to Transport a Patient

7.6 - Deploying Cross-Strap Patient 

Harness system

Transfer the patient onto the trolley and position the patient  
with their head on the headrest.
 Take one of the Crossover straps (red or blue) and cross it over 
the patient's body, clipping it into the buckle with corresponding 
same-coloured strap on the other side of the trolley.

The Cross-Strap harness system, available for use on POWERX as 
an alternative to the 4-point harness, consists of 2 cross-straps 
which cross the upper body, combined with  a single leg strap. 
Crash tested and CEN complaint as with all Ferno trolley patient 
harness systems, the Cross-Strap system for POWERX offers 
quicker deployment with less straps and improved operation 
when using patient blankets.

POWERX Cross-Strap harness system

Cross-Strap harness unbuckled 

Adjustable extension straps are also available for when 
transporting larger bariatric, which will adjust longer to 
accommodate even extreme bariatric patients.

Extension strap 
attached to 
buckle strap

Содержание POWER X SN-POW1001



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды