Ferno POWER X SN-POW1001, Руководство пользователя

Страница: 39 / 50

FERNO/MAN/0721/216-R22/UK
39
71 - Attachment of other 3rd party
Child harness (cont...)
Once a tang has been attached to all 4 straps, attach each of the
fixing straps onto the trolley.
The 2 upper ACR fixing straps should be attached to either set of
fixing studs located on the rear of the backrest. Either position
can be used, dependant on the size of patient and size of ACR
harness being used
The 2 lower ACR fixing straps should be attached to 2 dedicated
side-fixing points positioned at the base of the backrest
Attachment of upper ACR fixing straps to either set of
fixing studs
To attach the ACR lower fixing straps, use the dedicated fixing
stud positioned at each side of the trolley at the base of the
backrest. Place the tang over the fixing stud such that the stud
is protruding through the tang and then pull the strap until the
tang clicks in place.
Once all the attachment straps are firmly and correctly attached
to the trolley, tighten each strap, ensuring that the ACR is in the
correct position, central to the trolley, and tightly attached such
that it does not move.
After the ACR has been used, disconnect the tangs from each
attachment point on the trolley. Note that the tangs can be kept
connected to the ACR fixing straps whilst the harness is not in use
and being stored.
7 - PREPARING TO TRANSPORT A PATIENT
Preparing to Transport a Patient Preparing to Transport a Patient
Attachment of lower ACR fixing straps to fixing stud at
base of backrest either side of the trolley
Attached to upper studs Attached to lower studs
on backrest on backrest