Ferno POWER X SN-POW1001, Руководство пользователя

Страница: 37 / 50

FERNO/MAN/0721/216-R22/UK
37
To attach a child harness such as PediMate, PediMate PLUS
or Neomate to a trolley, the procedure laid out in the relevant
user manual supplied with each product should be studied
and followed. On POWERX there are dedicated fixing points for
attachment of the certain child harnesses.
PediMate, PediMate PLUS and Neomate top straps are attached
to POWERX in the same way as with any other trolley, where
the top fixing straps are wrapped around the back of the trolley,
fastening them together using the buckle and clasp at the end of
each strap and then fully tightening the straps once the whole
harness has been attached and correctly positioned on the
trolley.
If the loop attachment straps are not already installed on the
trolley, take the loop strap with attached tang and place the
tang over the fixing stud on the trolley until the stud protrudes
through the tang and then pull firmly on the loop until the tang
clicks in place. Ensure the tang is indeed attached. Do this also on
the other side of the trolley.
Loop strap for attaching lower fixing straps of
PediMate, attached to dedicated side-fixing stud
using metal tang
Attaching Pedimate top straps behind the backrest
7 - PREPARING TO TRANSPORT A PATIENT
Preparing to Transport a Patient
7.10 - Attaching a Child Harness to
POWERX trolley (PediMate / Neomate)
The lower straps of the PediMate child harness are attached to
the trolley utilising additional loop straps positioned half way
down the trolley and supplied with POWERX.
The loop strap is attached to the trolley onto a side-fixing stud
which is half way down the trolley, positioned on the hinge point
between the top of the leg-raise platform section and the seat
platform section, as per photo below, just below the adult patient
harness waist strap fixing point.
Take one of the Pedimate lower attachment straps, detach the
clasp from the buckle by depressing the button on the buckle,
feed the clasp through the loop strap and then reconnect
together into the buckle again, ensuring they are firmly attached.
Do this on both sides of the trolley.