Ferno POWER X SN-POW1001, Руководство пользователя

Страница: 29 / 50

FERNO/MAN/0721/216-R22/UK
29
6 - OPERATING THE TROLLEY FEATURES
The Split-Scoop half-sections should be positioned along the
length of the trolley such that the lift-up locking arms on the
brackets correctly line up with the hand-hold holes in the sides
of the Scoop as shown below.
6.39 - Attaching Split-Scoop fixing kit
(cont...)
Fixing bracket lift-up locking arm
Once the Scoop is positioned correctly, connect the two halves
of the Scoop together at the foot-end using one of the TSL
extension fixing poles, which have TSL locks at each end of the
pole. Then attach the head-end of the 2 Scoop halves using the
second TSL extension fixing pole.
Ensure Scoop hand-hold holes line up with locking
arms on fixing brackets at foot-end as per photo
above
Ensure that the fins of the Scoop are correctly held into the
fin holders on each of the fixing brackets at the head-end and
foot-end and that the locking arms are still sat correctly in the
hand-hold holes of the Scoop.
Ensure Scoop fins are under the holding plates
Recheck to ensure Scoop still positioned such that
hand-hold holes are in line with locking arms on foot-
end bracket
Connect Scoop halves at head- end with extension
fixing pole
Attaching 2 halves of Scoop together using extension
fixing pole
Operating the Trolley Features