Ferno POWER X SN-POW1001, Руководство пользователя

Страница: 17 / 50

FERNO/MAN/0721/216-R22/UK
17
6.13 - Foot-Operated Directional
Wheel Lock (to Nov 2020)
6 - OPERATING THE TROLLEY FEATURES
Directional wheel locks are located on both wheels at the head-
end of the trolley, allowing the wheel direction to be locked in
line with the trolley, to aid control when moving in a straight line,
such as along hospital corridors or when moving up or down an
incline, such as a vehicle ramp .
Two versions of directional wheel lock have been implemented
on POWERX, the second version an enhancement on the original
design in terms of different method of deployment but with the
same functionality for locking the front wheels in line with the
trolley
Rotating lever to engage/disengage lock
To engage the directional wheel lock, rotate the lever above the
wheel lock through 180 degrees so that the lever is pointing
outwards from the trolley. This will lower the wheel-lock pin,
which will then engage into the pin-slot located on the top of the
wheel fork as soon as the trolley is moved in a forward direction,
thereby locking the wheel parallel in line with the trolley.
To disengage the directional wheel lock, rotate the lever back
again through 180 degrees so the lever is pointing inwards. This
will raise and disengage the pin, thereby allowing the wheel to
swivel again.
Directional wheel lock with
manual-operated lever.
Lever pointing inwards
denotes lock disengaged
Use foot to engage
directional wheel lock
by flicking lever to point
outwards (rotate by 180
degrees)
Directional wheel lock pin drops when engaged
and locks into to of wheel fork once trolley is moved
forward
Note that on some very earlier models of POWERX with rotating
lever, the lever was orientated such that the directional wheel
lock was engaged with the lever pointing towards the head-end
of the trolley and disengaged with the lever pointing to the foot-
end of the trolley.
Second revision - Foot pedal to engage/disengage lock
Enhanced design implemented Nov 2020, with revised design
casting and directional wheel lock rotating lever replaced with a
foot pedal for engaging/disengaging the directional wheel lock
To engage the directional wheel lock, press down on the grey
pedal to lower the wheel-lock pin, which will then engage into
the pin-slot located on the top of the wheel fork as soon as the
trolley is moved in a forward direction, thereby locking the wheel
parallel in line with the trolley.
To disengage the directional wheel lock, flip the grey pedal
back up again with the toe of your shoe/boot. This will raise and
disengage the pin, thereby allowing the wheel to swivel again.
Disengaged Engaged
6.14 - Foot-Operated Directional
Wheel Lock (Nov 2020 onwards)
Operating the Trolley Features