Ferlux HIDROMATIC, Руководство пользователя

Страница: 8 / 48

8
ATTENTION!!!
THE INSTALLATION MUST BE EXECUTED BY AUTHORIZED PERSONNEL, WHO MUST LEAVE THE
BUYER A DECLARATION OF CONFORMITY OF THE INSTALLATION, IN WHICH HE WILL ASSUME
FULL RESPONSIBILITY FOR THE FINAL INSTALLATION AND THEREFORE THE PROPER FUNCTIONING
OF THE INSTALLED PRODUCT. FERLUX SHALL NOT BE LIABLE IN THE EVENT OF FAILURE TO COMPLY
WITH SUCH PRECAUTIONS.
2.1 LEGAL WARRANTEE
A user, to enjoy the legal warrantee, according to the EEC Directive 1994/44CE must carefully comply with the requirements
indicated in this manual, and in particular:
• Always act within the limits of use of the boiler.
• Always perform constant and careful maintenance.
• Authorize the use of the boiler to people of proven capacity, attitude and timely trained for this purpose.
The manufacturer is not responsible, civil, or criminal, directly or indirectly for:
• Installation not in accordance with the regulations in force in the country and the safety directives.
• Non-compliance by unqualified and/or unskilled personnel.
• Use not in accordance with security policies.
• Modifications and repairs not authorized by the Manufacturer performed to the equipment.
• Use of non-original or unspecified spare parts for that specific model.
• Insufficient maintenance.
• Exceptional events.
2.2 TECHNICAL ASSISTANCE
FERLUX can provide solutions to any technical problem regarding the use and maintenance in the entire life cycle of the
equipment.
2.3 SPARE PARTS
Use only original spare parts. Do not wait for the components to be damaged before proceeding to their replacement.
Replacing a deteriorated component before its breakage favors the prevention of accidents due precisely to the sudden
breakage of the components, which could harm people or objects.
3. TECHNICAL DATA
The data plate or label is located on the back of the equipment and presents all the characteristic data of the machine, including
the manufacturer’s data, the serial number and the CE marking. The lack of label complicates the installation and
maintenance tasks since it is not possible to identify the product. In the case of being damaged, request a duplicate of it from
the Technical Service.