background image

35

6.2 DISPLAY SCREEN 2

Below  is    the home  screen   2,  which  is  accessed by    swiping  the  main  screen  to  the  left. On this screen the  boiler 

operation   LEDs are shown on

08:36 Thu 09 Sep 2021

Resistance

Valve

Output Aux3

Thermostat 

Environment

Switch Flow

External Chrono

Output V2

Endless

Pump

Output Aux2

Lack of Pellet

2

V2

R

3

 7. OPERATION AND USE OF THE BOILER

7.1 TIPS AND WARNINGS

• 

Before   turning on  the    boiler,  make sure    that  inside  or  near      the    boiler  there is  no  flammable  material

• 

or that it could go into combustion.

• 

Use the fuel recommended by the manufacturer. 

• 

Do not use the boiler as an incinerator or otherwise than the use for which it is designed.

• 

The external surfaces    of  the  boiler    reach  high temperatures    for  touch,      so  precautions  should  be  taken

• 

suitable to avoid burns.

• 

Refer to this manual whenever you have any questions. Do not tamper with the display  until you are sure  which  procedure 
to  follow.

• 

Pay special  attention  to  the  alarms  and  messages  that are displayed   on the  display, it is  even  advisable  to take  
note  of them, in this way we will facilitate the work of the Technical Service in case of  intervention.

• 

Before turning on the boiler you should check that: there is nothing obstructing the air inlet tube, the burner is clean, the 
ashtray in place and the front door that gives access to the combustion chamber tightly closed. 

The door can only be 

opened when the boiler is stopped and  cold. 

• 

Do not touch the boiler with wet hands since it is an electrical appliance.

• 

Whenever you have any questions, consult this manual thoroughly. Do not manipulate  the display until you are sure that 

you have assimilated  what  procedure you should follow, the effect it produces on the operation and know how to reverse 

it if  necessary.

• 

Poor  handling  of  the  boiler  or    insufficient  maintenance  (not as   indicated  in  this  manual), can cause harm to people, 

animals, etc. In that case the manufacturer shall be exempt from all civil and criminal liability.

Содержание HIDROMATIC

















































Отзывы: