Fenix Imvico TK51 Series, Руководство по эксплуатации

Страница: 7 / 82

FENIX IMVICO
TK51/IF9000 OPERATION MANUAL
7/82
0 – INTRODUCTION
The TK51/IF9000 is a very high-performance embedded thermal line interface. Its
compact and functional design covers many professional uses. it is capable of printing
text, graphics, logo and bar code.
The TK51/IF9000 is intended to be integrated into the user’s final system. Its structure
allows an easy access both to the interface or the critical parts of the mechanism.
So, special care must be taken at choosing the TK51/IF9000 location, access and
protection from external damage. It can be used in laboratories, industrial and
professional environments.
The main features of the TK51/IF9000 are:
•
Simple installation and easy maintenance.
•
Low noise thermal printing.
•
Three paper widths available (60mm, 80 mm or 112 mm) depending on the SEIKO
LTP9000 series printing mechanism used.
•
High printing speed up to 250mm/s.
•
Line printing method: Printing is performed every time a text line is filled.
•
High reliability: 15 million lines.
•
Single 24V DC power supply.
•
No-paper, paper-near-end, head up and ticket pick up sensors.
•
High resolution printing (8 dots/mm).
•
IEEE 1284 parallel, serial RS232C or USB data input interface on-board.
•
Two internal character fonts (Font A = 12x24dots. Font B = 8x16dots).
•
Scalable font (independent scale in X / Y-axis), up to 64 times.
•
Bold, reverse, rotate and inverse character capabilities.
•
Underline mode text, 1-dot or 2-dots thickness selectable.
•
Windows character font load capability.
•
Programmable character and line space.
•
Graphic bitmap printing capabilities.
•
Several format Bar Code: Code39, EAN13, ITF and Code128.
•
512 kbytes of buffer for data input.
•
Control code based on ESC / POS commands
(*)
.
•
Hexadecimal mode for easy software debugging.
•
Partial-cut or full cut selectable by software.
•
Logo load capability, through Windows driver.
•
Automatic paper load.
•
Self test, hexadecimal mode and configuration mode features.
•
Windows 95, 98, XP & 2000 drivers and showing program.
•
Linux driver.
•
Firmware update through the communication port
(**)
.
This manual is the printer operations’ guide and is intended for the designer’s
application. The following sections contain a detailed description of both the hardware
and the configuration software that allow obtaining the maximum benefit of the
TK51/IF9000.
(*) ESC/POS are registered trademarks of Seiko Epson Corporation.
(**) Contact with FENIX IMVCO or your distributor.