manualshive.com logo in svg

Fenix Imvico TK51 Series, Руководство по эксплуатации

Поделиться
Скачать
Fenix Imvico TK51 Series Скачать руководство пользователя страница 34

FENIX IMVICO 

     TK51/IF9000 OPERATION MANUAL

34/82

3.5.5- THERMAL HEAD VOLTAGE (Vp) ERROR

[Description]

The power supply voltage is out of range (24VDC + 10%).

[Recover action]  This is a recoverable error. Unplug the power supply from the printer

and check if the output voltage of the power supply is within the
specified range. Replace it in case it is not working properly.

[Note]                    When this error occurs, some parts of the printer may be damaged. If

this happens, the printer will be unable to recover itself and some of
its components are likely to be replaced.

3.5.6- HARDWARE ERROR

[Description]

At initialization, the printer internally checks its hardware devices. If

they do not function properly, a critical error occurs.

[Recover action] This error cannot be recovered. One of the control board components

might be damaged and should be replaced or repaired.

3.5.7- TICKET PICK-UP ERROR

[Description]        The pick-up sensor detects paper in the nozzle.

 This error is given

                             only as informative flag (no action is taken)

. So, the user must

                             decide what to do when this error comes, e.g. before printing  the
                             following ticket, the application can check out if the previous one has
                             been picked-up, and do not print the next until it is picked-up.
[Recover action]  To recover from this error, the ticket has to be picked-up (after it has
                             been cutting).

3.5.8- BLACK MARK ERROR

[Description]         The optical mark sensor does not detect/find the black mark. This
                              error is given when:

a)  The paper does not have black mark.

                              b)  The black mark is not in the right position.
                              c)  The black mark does not have the right size or intensity.
[Recover action]    This is a Non-recoverable error. User must turn the printer off, and
                              check the paper and black mark characteristics.
[Note]                    The maximum amount of paper feed until find the black mark is 0,5m.

Содержание TK51 Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды