manualshive.com logo in svg

Fenix Imvico TK51 Series, Руководство по эксплуатации

Поделиться
Скачать
Fenix Imvico TK51 Series Скачать руководство пользователя страница 25

FENIX IMVICO 

     TK51/IF9000 OPERATION MANUAL

25/82

 

3 – BASIC OPERATIONS

 
 
 

3.1- LOADING PAPER

When the printer runs out of paper, there are two ways of loading paper: automatic and
manual.
Before starting the paper load sequence, please make sure the paper roll has been
placed in the right way.

Place the paper roll in the right direction. The thermal paper has only one surface
which can be printed (thermal side). In order to know which one it is, just scratch
the paper: the thermal side will show up the track on.

 

3.1.1- AUTOMATIC PAPER LOAD

1)  Make sure the TK51 is power supplied.
2)  Open the printing head and remove paper from inside the mechanism (if there is

any).

3)  Make sure that the printing head is closed.
4)  Make sure the paper end is cut in a straight way.

Fig.3.1-

 Automatic paper load.

5)  Put the paper end in the mechanism inlet.
6)  Push the paper in until the TK51 detects it and starts the auto-load sequence.
7)  Wait until the auto-load sequence extracts the paper from the printer outlet.

NOTE

    

✔

 In the automatic paper load, the printer motor runs at low speed, because the

        printer needs the maximum motor torque. Running at low speed, the motor is
        noisier, but it is not a wrong performing.

Thermal side

Содержание TK51 Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды