Fenix Imvico TK51 Series, Руководство по эксплуатации

Страница: 59 / 82

FENIX IMVICO
TK51/IF9000 OPERATION MANUAL
59/82
GS v 0 m xL xH yL yH d1 ... dk
[Name] Print raster bit image
[Format] ASCII GS v 0
m xL xH yL yH d1...dk
Hex 1D 76 30 m xL xH yL yH d1...dk
Decimal 29 118 48 m xL xH yL yH d1...dk
[Range] <00>H
≤
m
≤
<03>H
<00>H
≤
xL
≤
<FF>H
<00>H
≤
xH
≤
<FF>H where 1
≤
(xL + xH x 256)
≤
128
<00>H
≤
yL
≤
<FF>H
<00>H
≤
yH
≤
<08>H where 1
≤
(yL + yH x 256)
≤
4095
<00>H
≤
d
≤
<FF>H
k = (xL + xH x 256) x (yL + yH x 256) (k
≠
0)
[Description] Selects raster bit-image mode. The value of m selects the mode, as
follows:
m Mode
Vertical Dot
Density
Horizontal Dot
Density
<00>H Normal 203.2 dpi 203.2 dpi
<01>H Double-width 203.2 dpi 101.6 dpi
<02>H Double-height 101.6 dpi 203.2 dpi
<03>H Quadruple 101.6 dpi 101.6 dpi
(dpi: dots per 25.4 mm {1"})
•
xL , xH , select the number of data bytes (xL + xH x 256) in the horizontal
direction for the bit image.
•
yL , yH , select the number of data bits (yL + yH x 256) in the vertical direction
for the bit image.
[Notes]
•
This command is effective only when there is no data in the print buffer.
•
Data outside the printing area is read in and discarded on a byte-by-byte
basis.
•
The position at which subsequent characters are to be printed for raster bit
image is specified by GS L (Set left margin).
•
d indicates the bit-image data. Setting a bit to 1 prints a dot and setting it to 0
does not print a dot.
[Example] When xL + xH x 256 = 64