Fenix Imvico TK51 Series, Руководство по эксплуатации

Страница: 55 / 82

FENIX IMVICO
TK51/IF9000 OPERATION MANUAL
55/82
1)
GS V m
2)
GS V m n
[Name] Select cut distance and cut paper
[Format]
1)
ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
2)
ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range]
1)
m = <01>H
2)
m = <42>H; 0
≤
n
≤
255
[Description] Selects a distance for cutting paper and executes a full cut. The value of
m selects the distance as follows:
m Cutting distance
<01>H Cuts the paper in the current position.
<42>H Feeds paper (“ cutting-D ” + [ n x 0,0625mm]), and cuts the paper.
[Notes for
1)
and
2)
]
•
This command is effective only when processed at the beginning of a line.
•
“ Cutting-D ” is the distance between the thermal head (printing position) and
the cutter (11mm).
•
After cutting the ticket, the printer always feeds the paper back to the printing
position.
•
If this command is sent without cutter connection or the cut is not whole
make, TK51/IF9000 enter cutter error status.
[Notes for
1)
]
•
The printer cuts paper at the current position, even when the black mark is
enabled.
[Notes for
2)
]
Black mark disabled:
a) When n = <00>H, the printer feeds paper “ Cutting-D ” and cut it.
b) When n
≠
<00>H, the printer feeds paper (“ Cutting-D ” + [ n x
0.0625 mm]) and cuts it.
Black mark enabled:
a) When the black mark sensor is set to be effective, the printer feeds
paper to (black mark
±
[(value which is set by GS ( F ) x 0.0625mm])
and cuts it. After cutting, it feeds paper to the position specified by the
command
GS ( F . See point 3.6- OPTICAL MARK .
[Default] n = <00>H
[Reference] GS ( F, ESC i, ESC m