Fenix Imvico TK51 Series, Руководство по эксплуатации

Страница: 44 / 82

FENIX IMVICO
TK51/IF9000 OPERATION MANUAL
44/82
ESC ! n
[Name] Select print mode(s)
[Format] ASCII ESC !
n
Hex 1B 21 n
Decimal 27 33 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Selects print mode(s) using n as follows:
Bit OFF/ON Hex Function
OFF 00 Character font A (12 x 24). 0
ON 01 Character font B (8 x 16).
1 -- -- Undefined.
2 -- -- Undefined.
OFF 00 Emphasized mode not selected. 3
ON 08 Emphasized mode selected.
OFF 00 Double-height mode not selected. 4
ON 10 Double-height mode selected.
OFF 00 Double-width mode not selected. 5
ON 20 Double-width mode selected.
6 -- -- Undefined.
OFF 00 Underline mode not selected. 7
ON 80 Underline mode selected.
[Notes]
•
When both double-height and double-width modes are selected, quadruple-
size characters are printed.
•
When some characters in a line are double or more height, all the characters
in the line are aligned at the baseline.
•
ESC E can also select the emphasized mode. Be careful when uses both
command.
•
ESC M can also select character font type. However, the setting of the last
received command is effective.
•
GS ! can also select character size. However, the setting of the last received
command is effective.
•
If this command is not received at the beginning of a line, and the character
font is to be changed, all previous data in the print buffer is printed and the
ticket is placed at the beginning of the next line.
[Default] n = <00>H
[Reference] ESC M, ESC E, ESC G, GS !
ESC 2
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description] Selects 3.75 mm (30 x 0.125 mm) line spacing.
[Reference]
ESC 3.