manualshive.com logo in svg

Fenix Imvico TK51 Series, Руководство по эксплуатации

Поделиться
Скачать
Fenix Imvico TK51 Series Скачать руководство пользователя страница 27

FENIX IMVICO 

     TK51/IF9000 OPERATION MANUAL

27/82

3.3- LEDS INDICATORS

The TK51/F9000 is provided by the CON7
connector to install three leds to visually inform
the printer status.

•

  Power (POWER) LED:

GREEN

ON:

Power is stable.

OFF: Power failure.

•

  Paper roll end (PAPER OUT) LED: 

RED

ON:

Paper-end and/or thermal head-up detected.

OFF: Paper is loaded and thermal head closed (normal condition).

            NOTE

  

When this LED is ON indicates one of these three situations:

✔

 There is no paper at the printer inlet.

✔

 The thermal head is open.

✔

 Both previous situations.

Any of these situations is critical enough so as to stop the printing.
For this reason they are indicated in the same way, without making distinctions
between them.

•

  Error (ERROR) LED: 

RED

ON: 

ERROR state (See point 

3.5- ERROR PROCESSING

).

OFF: Normal 

condition

3.4- SPECIAL MODES

Besides the normal printing mode, in which all the received data are printed according
to the settings or conditions fixed by the commands, the TK51/IF9000 allows three

SPECIAL MODES

 which must be set at the moment of turning on the printer or via

commands.

3.4.1- SELF-TEST MODE

The printer provides the self-test mode with two different functionality: showing
information of the settings of that particular printer model and verifying the printing.

To enter the self-test mode, the printer must be powered on while keeping pressing the
button. The TK51/IF9000 will start printing a report, which allows checking the features
of this particular model, like the firmware current version, control functions of the
communications protocol,  and so on.

If, once this printing has been finished, the button is kept pressed; the printer will start
printing continuously and repetitively a character map until it finally concludes the self-
test by printing ‘* * completed * *’.   This second option of the self-test mode has the
goal of validating the printing speed and quality.

Power

Fig.3.3-

 TK51 leds.

Paper out

Error

Содержание TK51 Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды