Fenix Imvico TK51 Series, Руководство по эксплуатации

Страница: 38 / 82

FENIX IMVICO
TK51/IF9000 OPERATION MANUAL
38/82
3.6.1- EXAMPLE USING PAPER WITH BLACK MARK
Some points must be taken in account when using paper with black mark.
There are three commands for handling marked paper:
•
GS ( F...
"
" "
"
Set offset values. This command allows setting the distances between
the optical mark and the ticket cutting position (cut offset) and the start ticket printing
position (print offset). These distances can be executed forward or backward.
•
GS FF
" " " "
Feed paper until printing position. This command feeds paper until finding
next black mark. Then moves the ticket, forward or backward, placing it at the
printing position (print offset).
•
GS V m n
"
" "
"
Cut paper. This command feeds paper until finding next optical mark.
Then moves the ticket, backward or forward, placing it at the cutting position (cut
offset). Cuts, and then moves the next ticket, forward or backward, to the printing
position (print offset).
•
ESC j n
"
" "
"
Paper back feed. Auxiliary command to back feed paper when use
tickets with especial black mark configuration.
NOTES
✔ ✔ ✔ ✔
Pressing the PFEED button, when the Black Mark is enabled, performs
like GS V m n command.
✔ ✔ ✔ ✔
The maximum amount of paper feed until find the black mark is 0,5m.
✔
✔ ✔
✔
If the host application uses the Windows driver, can also handle the
optical mark by the available settings.