Fenix Imvico TK51 Series Скачать руководство пользователя страница 26

Страница: 26 / 82

FENIX IMVICO

TK51/IF9000 OPERATION MANUAL

26/82

3.1.2- MANUAL PAPER LOAD

1)  Open the printing head and remove the paper (if there is any).
2)  Keep the printing head open.
3)  Place the paper roll in the right direction. The thermal paper has only a

side which

SEIKO CAP9000 series

can print (thermal side). If you don’t knows

which one is it, just scratch the paper: the thermal side will show up the track on.

4)  Put the paper end in the mechanism inlet.
5)  Push the paper in until it reaches the mechanism outlet.
6)  Close the printer head.

3.2- BUTTONS FUNCTIONS

•

PFEED Button

PAPER FEEDING: when the TK51/IF9000 is powedred on pressing the button

will feed the paper, except for the following conditions:

a) the paper roll end sensor detects a paper end
b) the printer thermal head is opened
c) another non-recoverable error is present

SELF-TEST MODE:

if pressed on start-up it activates this mode.

HEXADECIMAL MODE:

If pressed together with

PROG

button on start-up,

this mode is activated.

PROGRAMMING MODE:

in this mode, pressing the button means

“YES”

WHEN OPTICAL MARK IS ENABLED:

the TK51/IF9000 will feed paper until

black mark (500mm max.) and will prepare the next ticket according to

GS ( F

command.

•

PROG Button

PROGRAMMING MODE:

if pressed on start-up it activates this mode.

HEXADECIMAL DUMP MODE:

If pressed together with

PFEED

button on

start-up, this mode is activated.

PROGRAMMING MODE:

in this mode, pressing the button means

“NO”

If pressed when the printer is already started, the TK51/IF9000 feeds and cuts

paper, cleaning the nozzle.

Fig.3.2-

TK51 buttons.

PROG
button

FEED
button

Содержание TK51 Series



















































































Результаты поиска

Содержание TK51 Series

Отзывы:

Бренды по названию

Популярные бренды

Fenix Imvico TK51 Series, Руководство по эксплуатации

Результаты поиска

Содержание TK51 Series

Отзывы:

Бренды по названию

Популярные бренды